Quiz Buzzer Lockout
On an Arduino Nano 33 BLE, run a three-team quiz buzzer: the first team to press lights its lamp, everyone else is locked out, and the quizmaster's reset opens the next round, even when a button is still held down.
- Placa
- Nano 33 BLE · Arduino
- Dificultad
- Fácil
- Tema
- Applied Integration
- Acceso
- Plan completo
La tarea
Quiz Buzzer Lockout
A pub quiz runs a buzzer round for three teams. Whoever hits their buzzer first gets to answer, and nobody else may steal the turn until the quizmaster resets the system. Teams are competitive: some keep their hand pressed on the button, hoping to win the next question the instant the round opens.
Hardware
- Arduino Nano 33 BLE (nRF52840, 3.3 V logic). Serial console on
Serial1(D0/D1), 115200 baud.Serialis USB and is not seen by the tests. - Team buzzers A, B, C on D2, D3, D5; quizmaster reset button on D6. All are arcade buttons to GND with hardware debouncing: use the internal pull-ups,
LOW= pressed. - Team lamp panel: lamp A on D4, B on D8, C on D9,
HIGH= lit.
Este es el inicio de la tarea. Inicia sesión con el plan completo para leer el resto y resolverla.
Qué incluye
- Tu firmware se compila y ejecuta en una placa emulada y se comprueba con pruebas a nivel de hardware.
- Una explicación escrita de la solución.
- No necesitas placa de desarrollo ni toolchain local.
¿Nuevo en embebidos? Empieza por la hoja de ruta: Cómo aprender sistemas embebidos (en inglés)